Description
EWP80 Combo – 12V 80LPM/21GPM Remote Electric Water Pump & Controller Combo (Part #8907)
The EWP80 is available for purchase in following options:
- Pump Only (Part #8105)
- Kit (Part #8005)
- Combo with Controller (Part #8907)
The EWP®80 Electric Water Pump and LCD EWP®/Fan Digital Controller Combo – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat, and operate your Thermatic® Fan.
The EWP®80 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two liters, 12 Volt Only.
The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability. The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque and used extensively in Intercooler applications.
| COMBO CONTENTS | |
| PART DESCRPTION | UNITS |
| EWP80 – Nylon 12V Assembly | 1 |
| Nylon Flange Adapter: 35mm Straight | 1 |
| Nylon Flange Adapter: 35mm 90° Elbow | 1 |
| Adaptor – Rubber Sleeve – 3mm {1/8″} | 4 |
| HOSE CLAMP (WD9 40-60 W2) EWP (1110020130) | 4 |
| EWP ADAPTOR O-RING | 2 |
| Wiring Harness – EWP & Fan controller : suits 8020, 8000, 8001 & 8002 | 1 |
| EWP/Fan Digital controller | 1 |
| Adaptor – Nylon – In Line, 35mm (2 x 1/4″ NPT) | 1 |
| 1/4″ NPT Nylon – Bung | 1 |
| U-Bracket – For #8002 | 1 |
| Mounting Plate – For #8002 | 1 |
| SCREW – SELF TAP 8X3/8 BZ | 1 |
| BLUE 6mm Ring Terminal | 1 |
| 5×12 Flanged Hex Set Screw Zinc Silver | 6 |
| 5×16 Flanged Hex Set Screw Zinc Silver/ | 6 |
| M5 FLANGE NUT ZINC SILVER | 6 |
| Sensor Thermal – coolant temp – ¼” NPT thread | 1 |
| TECHNICAL SPECIFICATIONS | ||||
| EWP80 – ELECTRIC WATER PUMP | LCD CONTROLLER | |||
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 7.5A @ 13V | Display LCD size | 64.6mm (2.54”) x 55.6mm (2.19”) | |
| Flow rate (max) | 80 L/min (21.13 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40° to 130°C (-40° to 266°F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design | Clockwise centrifugal with volute chamber | Targeted (set) temperatures | Singular degrees from: 40°C (104°F) to 110°C (230°F) |
|
| Pump weight | 900 grams (2.0 lb) | Memory | Set & targeted temperature | |
| Pump material | Nylon 66, 30% glass-filled | Fan cut-in temp. | 3°C (5.4°F) above the targeted (set) temperature | |
| Burst pressure | 350 kPa (50 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type | Thermistor in housing | |
| Fits hose sizes | 32mm to 51mm (1⅜” to 2”) | Overrun/ shutdown | -10°C (14°F) below set/target temperature or 3 minutes | |
| Self Priming | No, none of our pumps are self-priming | Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | |
| Weight | 100 grams (3.5 oz) | |||
| Dimensions | Length = 98mm (3.8″)
Width = 95mm (3.7″) Depth = 25mm (1”) |
|||
Reviews
There are no reviews yet.