Description
Electric Booster Pump (EBP23) (Part #9050)
The EBP23 is a ‘brushless’ 12 volt, high flow (23 litres / 6 gallons per minute), magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. The many EBP applications include: booster for car heater and LPG systems, solar pump applications, water cooled motorcycle, go-kart engines, turbo air / water intercoolers & household irrigation.
Kit Contents |
Units |
Electric Booster Pump – EBP23 | 1 |
EBP Adapters Stepped (19mm to 12mm) | 2 |
Heater Hose 19mm ID | 11cm |
Hose Clamps | 4 |
Mounting Brackets | 1 |
Wiring Loom (AMP Plug) | 1 |
Installation Instructions | 1 |
Technical Specifications |
|
Motor | 12V Brushless |
Operating Voltage | 6V to 18V |
Rated Current Draw | 1.25 Amps |
Hose Size | 19mm (3/4″ Inch)
*With EBP Adapters Reducer (19mm to 12mm) |
Pump Design | Recirculating * Centrifugal |
Input Power | 15W |
Max Flow Rate @ 0 Bar | 23 l/min (6 gal/min) |
Rated Flow Rate @ 0.1 Bar | 17.25 l/min (4.6gal/min) |
Max Head Height | 2.5 meters |
Drive | Magnetic – No seals |
Operating Temperature | -40C to +125C (-10F to +257F) |
Burst Pressure | 250Kpa (36PSI) |
IP Rating | IP68 |
Self Priming | No |
Weight | 364g (0.8 lbs) |
Rated Life | 20,000 hrs |
The EBP®23 is designed to complement your existing Davies, Craig EWP (Electric Water Pump), or belt-driven mechanical water pump, or improve your heater and/or cooling system or assist engine block cooling circulation. The EBP can continually circulate coolant around the engine head, block and by-pass. It has a high flow capacity and has the advantage of running at a speed independent of the engine speed. The EBP® can also be set to continue running with a timer or thermal switch (not supplied) after engine shut down to prevent damaging heat soak.
Reviews
There are no reviews yet.