fbpx

EWP115 NYLON KIT – 12V 115LPM/30GPM REMOTE ELECTRIC WATER PUMP (8025)

EWP115 NYLON KIT – 12V 115LPM/30GPM REMOTE ELECTRIC WATER PUMP (8025)

R3,898.50

The EWP115 Electric Water Pump – universal fit, do-it-yourself, easy to install water pump designed to replace or compliment your existing belt-driven mechanical water pump.

Available on backorder

Description

EWP115 Nylon Kit – 12V 115LPM/30GPM Remote Electric Water Pump (PART #8025)

The EWP115 Nylon 12V is available for purchase in following options:

  • Pump Only (Part #8125) 
  • Kit (Part #8025) 
  • Combo with Controller (Part #8930)

The EWP®115 (115 liters per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

 The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Our EWP range are also extensively used in Intercooler Applications.

KIT CONTENTS
PART DESCRPTION UNITS

EWP115 Nylon 12V

1

EWP Basic Wiring Harness

1

Adaptor – Rubber Sleeve – 3mm {1/8″}

2

Hose Clamps

2
RED – Wire Joiner 1
RED – 6mm Ring Terminal 1
RELAY – 12V 40 Amp 5 Pin W/- Resistor Protection 1

SCREW – SELF TAP 8X3/8 BZ

1

 

TECHNICAL SPECIFICATIONS
 Voltage 12 Volt Pump
Operating voltage 3V DC to 15V DC
Maximum current 10A @ 13V
Flow rate (max) 115 L/min (30.38 US gal/min) @ 13V DC
Operating temp. -40° to 130°C
   (-40° to 266°F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 920 grams (2.03 lb)
Pump material Nylon 66 – 30% Galss Filled
Burst pressure 500 kPa (72.5 psi)
Seal Ceramic face seal
Self Priming No, none of our pumps are self-priming
Fits hose sizes 35mm to 51mm (1⅜” to 2”)

Push on Fittings

Push-On fitting Size EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm

 

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Us