Description
EWP115 Alloy Combo – 12V 115LPM/30GPM Remote Electric Water Pump & Controller (Part #8950)
The EWP115 Alloy12V is available for purchase in following options:
- Pump Only (Part #8140)
- Kit (Part #8040)
- Combo with Controller (Part #8950)
Take total control of your engine cooling with the Davies Craig EWP®115 Alloy Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan.
The EWP®115 (115 liters per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy. Our EWP range are also extensively used in Intercooler Applications.
| COMBO CONTENTS | |
| PART DESCRPTION | UNITS |
|
EWP115 Alloy |
1 |
|
EWP/Fan Digital Controller & Mounting Plate + Bracket |
1 |
|
Sensor Thermal – coolant temp – ¼” NPT thread |
1 |
|
Adaptor – Nylon – In Line, 35mm (2 x 1/4″ NPT) |
1 |
| 1/4″ NPT Nylon – Bung | 1 |
|
Wiring Harness |
1 |
|
Adaptor – Rubber Sleeve – 3mm {1/8″} |
4 |
|
Hose Clamps |
4 |
|
SCREW – SELF TAP 8X3/8 BZ |
1 |
| BLUE 6mm Ring Terminal | 1 |
| TECHNICAL SPECIFICATIONS | ||||
| EWP115 Alloy ELECTRIC WATER PUMP | LCD Controller | |||
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 10A @ 13V | Display LCD size | 64.6mm (2.54”) x 55.6mm (2.19”) | |
| Flow rate (max) | 115 L/min (30.38 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40° to 130°C (-40° to 266°F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design | Clockwise centrifugal with volute chamber | Targeted (set) temperatures | Singular degrees from: 40°C (104°F)to 110°C (230°F) |
|
| Pump weight | 920 grams (2.3 lb) | Memory | Set & targeted temperature | |
| Pump material | Aluminium (Powder Coated) | Fan cut-in temp. | 3°C (5.4°F) above the targeted (set) temperature | |
| Burst pressure | 500 kPa (72.5 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type |
Thermistor in housing | |
| Self Priming | No, none of our pumps are self-priming | |||
| Fits hose sizes
& Internal Fitting |
35mm to 51mm (1.38” to 2”)
-Inlet & Outlet: -16AN ORB |
Overrun/ shutdown | -10°C (14°F) below set/target temperature or 3 minutes | |
| Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | |||
| Push-On fitting Size | EWP Inlet & Outlet 38mm
|
Weight | 100 grams (3.5 oz) | |
| Dimensions | Length = 98mm (3.8″) Width = 95mm (3.7″) Depth = 25mm (1”) |
|||
Reviews
There are no reviews yet.