fbpx

EWP115 NYLON COMBO – 12V 115LPM/30GPM REMOTE ELECTRIC WATER PUMP & CONTROLLER COMBO(8930)

EWP115 NYLON COMBO – 12V 115LPM/30GPM REMOTE ELECTRIC WATER PUMP & CONTROLLER COMBO(8930)

R6,279.00

Take total control of your engine cooling with the Davies Craig EWP®115 Nylon Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan.

Description

EWP115 Nylon Combo – 12V 115LPM/30GPM Remote Electric Water Pump & Controller Combo (Part #8930)

The EWP115 Nylon 12V is available for purchase in following options:

  • Pump Only (Part #8125) 
  • Kit (Part #8025)
  • Combo with Controller (Part #8930) 

Take total control of your engine cooling with the Davies Craig EWP®115 Nylon Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan. The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.

Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP®/Fan Digital Controller, the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. Our EWP range are also extensively used in Intercooler Applications.

COMBO CONTENTS
PART DESCRPTION UNITS
EWP115 – NYLON 12v Assembly 1
Adaptor – Rubber Sleeve – 3mm {1/8″} 4
HOSE CLAMP 4
Wiring Harness – EWP & Fan controller 1
EWP/Fan Digital controller 1
Adapter – Nylon – In Line, 35mm (2 x 1/4″ NPT)

(*As of Sept 2021 the inline adapter changes to 38mm)

1
Adaptor – Rubber Sleeve – 3mm {1/8″}

*Removed Sept 2021

4
1/4″ NPT Nylon – Bung 1
U-Bracket – For #8002 1
Mounting Plate – For #8002 1
SCREW – SELF TAP 8X3/8 BZ 1
BLUE 6mm Ring Terminal – B2-6 1
Sensor Thermal – coolant  temp – ¼” NPT thread 1

 

TECHNICAL SPECIFICATIONS
EWP115 – ELECTRIC WATER PUMP      LCD CONTROLLER
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 10A @ 13V Display LCD size 64.6mm (2.54”) x 55.6mm (2.19”)
Flow rate (max) 115 L/min (30.38 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40° to 130°C (-40° to 266°F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design Clockwise centrifugal with volute chamber Targeted (set) temperatures Singular degrees from:
40°C (104°F) to 110°C (230°F)
Pump weight 920 grams (2.3 lb) Memory Set & targeted temperature
Pump material Nylon 66, 30% glass-filled Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type
Thermistor in housing
Self Priming No, none of our pumps are self-priming
Fits hose sizes 35mm to 51mm (1.38” to 2”) Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
 Push-On fitting Size   EWP Inlet & Outlet 38mm

  • with 3mm Sleeve (#8510) 44mm
  • with 6mm Sleeve (#8511) 51mm 
Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
Weight 100 grams (3.5 oz)
Dimensions Length = 98mm (3.8″)

Width = 95mm (3.7″)

Depth = 25mm (1”)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Us