Description
EWP115 Alloy Kit – 12V 115LPM/30GPM Remote Electric Water Pump (PART #8040)
The EWP115 Alloy12V is available for purchase in following options:
- Pump Only (Part #8140)
- Kit (Part #8040)
- Combo with Controller (Part #8950)
The EWP®115 (115 liters per minute) pump is suitable for small, medium, large, high- performance and 4WD vehicles. It’s a performance product that improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
The EWP®115 is a practical alternative to the mechanical belt-driven pump or fitted as an auxiliary pump. Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Our EWP range are also extensively used in Intercooler Applications.
| KIT CONTENTS | |
| PART DESCRPTION | UNITS |
|
EWP115 Alloy 12V |
1 |
|
EWP Basic Wiring Harness |
1 |
|
Adaptor – Rubber Sleeve – 3mm {1/8″} |
2 |
|
Hose Clamps |
2 |
| RED – Wire Joiner | 1 |
| RED – 6mm Ring Terminal | 1 |
| RELAY – 12V 40 Amp 5 Pin W/- Resistor Protection | 1 |
|
SCREW – SELF TAP 8X3/8 BZ |
1 |
| TECHNICAL SPECIFICATIONS | |
| Voltage | 12 Volt Pump |
| Operating voltage | 3V DC to 15V DC |
| Maximum current | 10A @ 13V |
| Flow rate (max) | 115 L/min (30.38 US gal/min) @ 13V DC |
| Operating temp. | -40° to 130°C (-40° to 266°F) |
| Pump design | Clockwise centrifugal with volute chamber |
| Pump weight | 920 grams (2.03 lb) |
| Pump material | AluminIum (powder coated) |
| Burst pressure | 500 kPa (72.5 psi) |
| Seal | Ceramic face seal |
| Self Priming | No, none of our pumps are self-priming |
| Fits hose sizes | 35mm to 51mm (1⅜” to 2”)
Inlet: -16AN (12) Outlet: -16AN (12) |
| Push-On fitting Size | EWP Inlet & Outlet 38mm
|
Reviews
There are no reviews yet.