Description
EWP115 Nylon Combo – 12V 115LPM/30GPM Remote Electric Water Pump & Controller Combo (Part #8930)
The EWP115 Nylon 12V is available for purchase in following options:
- Pump Only (Part #8125)
- Kit (Part #8025)
- Combo with Controller (Part #8930)
Take total control of your engine cooling with the Davies Craig EWP®115 Nylon Electric Water Pump and LCD EWP®/Fan Digital Controller. The Controller will also manage the operation of your Thermatic® Fan. The EWP®115 (115 litres per minute) pump is suitable for small, medium, large, high-performance and 4WD vehicles. It improves engine cooling control and capacity whilst giving you more power and torque and improved fuel economy.
Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP®/Fan Digital Controller, the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. Our EWP range are also extensively used in Intercooler Applications.
| COMBO CONTENTS | |
| PART DESCRPTION | UNITS |
| EWP115 – NYLON 12v Assembly | 1 |
| Adaptor – Rubber Sleeve – 3mm {1/8″} | 4 |
| HOSE CLAMP | 4 |
| Wiring Harness – EWP & Fan controller | 1 |
| EWP/Fan Digital controller | 1 |
| Adapter – Nylon – In Line, 35mm (2 x 1/4″ NPT)
(*As of Sept 2021 the inline adapter changes to 38mm) |
1 |
| Adaptor – Rubber Sleeve – 3mm {1/8″}
*Removed Sept 2021 |
4 |
| 1/4″ NPT Nylon – Bung | 1 |
| U-Bracket – For #8002 | 1 |
| Mounting Plate – For #8002 | 1 |
| SCREW – SELF TAP 8X3/8 BZ | 1 |
| BLUE 6mm Ring Terminal – B2-6 | 1 |
| Sensor Thermal – coolant temp – ¼” NPT thread | 1 |
| TECHNICAL SPECIFICATIONS | ||||
| EWP115 – ELECTRIC WATER PUMP | LCD CONTROLLER | |||
| Operating voltage | 3V DC to 15V DC | Voltage range | 12V DC to 29V DC | |
| Maximum current | 10A @ 13V | Display LCD size | 64.6mm (2.54”) x 55.6mm (2.19”) | |
| Flow rate (max) | 115 L/min (30.38 US gal/min) @ 13V DC | Maximum current | 12Amps | |
| Operating temp. | -40° to 130°C (-40° to 266°F) | Warning alarm | High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit | |
| Pump design | Clockwise centrifugal with volute chamber | Targeted (set) temperatures | Singular degrees from: 40°C (104°F) to 110°C (230°F) |
|
| Pump weight | 920 grams (2.3 lb) | Memory | Set & targeted temperature | |
| Pump material | Nylon 66, 30% glass-filled | Fan cut-in temp. | 3°C (5.4°F) above the targeted (set) temperature | |
| Burst pressure | 500 kPa (72.5 psi) | Controller type | PCB with micro-processor | |
| Seal | Ceramic face seal | Sensor type |
Thermistor in housing | |
| Self Priming | No, none of our pumps are self-priming | |||
| Fits hose sizes | 35mm to 51mm (1.38” to 2”) | Overrun/ shutdown | -10°C (14°F) below set/target temperature or 3 minutes | |
| Push-On fitting Size | EWP Inlet & Outlet 38mm
|
Indicators | Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm) | |
| Weight | 100 grams (3.5 oz) | |||
| Dimensions | Length = 98mm (3.8″)
Width = 95mm (3.7″) Depth = 25mm (1”) |
|||
Reviews
There are no reviews yet.