fbpx

EWP80 KIT – 12V 80LPM/21GPM REMOTE ELECTRIC WATER PUMP (8005)

EWP80 KIT – 12V 80LPM/21GPM REMOTE ELECTRIC WATER PUMP (8005)

R3,622.50

The revolutionary, Australian designed, EWP pump is made from anti-corrosive, lightweight, glass-filled nylon & incorporates a carbon mechanical face seal for added reliability.

Out of stock

Description

The EWP80 is available for purchase in following options:

  • Pump Only (Part #8105) 
  • Kit (Part #8005) 
  • Combo with Controller (Part #8907)

The EWP®80 Electric Water Pump – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump. It will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two liters. The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.

The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque and used extensively in Intercooler applications. 

CONTENTS
PART DESCRPTION UNITS

EWP80 – Nylon 12V Assembly

1
Nylon Flange Adapter: 35mm 90° Elbow 1
Nylon Flange Adapter: 35mm Straight 1
EWP ADAPTOR O-RING 2
Adaptor – Rubber Sleeve – 3mm {1/8″}

(Increase hose fitting size to 38mm)

*For larger hose size, you will need 6mm sleeves (Part #18511) which will increase adaptor to fit hose size 41~42mm *not in kit*

2
HOSE CLAMP 2
EWP BASIC PUMP LOOM 1
RED – Wire Joiner 1
RED – 6mm Ring Terminal 1
RELAY – 12V 40 Amp 5 Pin W/- Resistor Protection 1
SCREW – SELF TAP 8X3/8 BZ 1
5×12 Flanged Hex Set Screw Zinc Silver 6
5×16 Flanged Hex Set Screw Zinc Silver 6
M5 FLANGE NUT ZINC SILVER 6

 

TECHNICAL SPECIFICATIONS
Operating voltage 3V DC to 15V DC
Maximum current 7.5A @ 13V
Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC
Operating temp. -40° to 130°C (-40° to 266°F)
Pump design Clockwise centrifugal with volute chamber
Pump weight 900 grams (2.0 lb)
Pump material Nylon 66, 30% glass-filled
Burst pressure 350 kPa (50 psi)
Seal Ceramic face seal
Self Priming No, none of our pumps are self-priming
Fits hose size 32mm to 51mm (1⅜” to 2”)

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Call Us